-
Electro-optic modulator Mini 10~3000MHz Analog Wideband Transceiver Module Optical Transmission modulator
The ROF Series Small analog wideband transceiver module is a low-cost, high-performance analog wideband transceiver with a very wide dynamic range, designed specifically for fiber optic RF applications. A pair of transceivers will create a two-way RF to optical and optical to RF conversion and transmission link that can provide a high spurious-free dynamic range (SFDR), operating at frequencies from10MHz to 3GHz. The standard optical connector is FC/APC for low back reflection applications, and the RF interface is via a 50 ohm SMA connector. The receiver uses a high-performance InGaAs photodiode, the transmitter uses a linear optically isolated FP/DFB laser, and the fiber uses a 9/125 μm single-mode fiber with an operating wavelength of 1.3 or 1.5μm. -
Mini 0.6~6GHz Analog Wideband Transceiver modulator Analog Broadband Optical Receiver
The Mini analog wideband transceiver module(Fiber Optic Transmitter) is a low-cost, high performance analog wideband transceiver with a very wide dynamic range, designed specifically for optical fiber RF applications. A pair of transceivers will create two-way RF to optical and optical to RF conversion and transmission links that can provide high spurious free dynamic range(SFDR), operating at frequencies from 0.6GHz to 6GHz. The standard optical connector is FC/APC for low back reflection applications, and the RF interface is via a 50 ohm SMA connector. The receiver uses high performance InGaAs photodiode, the transmitter uses linear optical isolation FP/DFB laser, and the optical fiber uses 9/125 μm single-mode fiber with working wavelength of 1.3 or 1.5μm. -
Mini 0.6~6GHz Analog Wideband Transceiver Module Optical Transmission Link Fiber Optic Transmitter
The Mini analog wideband transceiver module(Fiber Optic Transmitter) is a low-cost, high-performance analog wideband transceiver with a very wide dynamic range, designed specifically for optical fiber RF applications. A pair of transceivers will create two-way RF to optical and optical to RF conversion and transmission links that can provide high spurious free dynamic range (SFDR), operating at frequencies from 0.6GHz to 6GHz. The standard optical connector is FC/APC for low back reflection applications, and the RF interface is via a 50 ohm SMA connector. The receiver uses high performance InGaAs photodiode, the transmitter uses linear optical isolation FP/DFB laser, and the optical fiber uses 9/125 μm single-mode fiber with working wavelength of 1.3 or 1.5μm.
-
Rof 200M Photodetector Avalanche Photodiode Detector Avalanche Photodetector
The high sensitivity Photodetector is mainly composed of ROF-APR series APD Photodetector (APD photoelectric detection module) and HSP low speed high sensitivity module, which has high sensitivity and wide spectral response range and can provide different sizes of packages according to customer requirements.
-
ROF Optical Detector Avalanche Photodetector Module APD Photodetector
The high sensitivity avalanche photodetector is mainly composed of ROF-APR series APD Photodetector (APD photoelectric detection module) and HSP low speed high sensitivity module, which has high sensitivity and wide spectral response range and can provide different sizes of packages according to customer requirements.
-
Rof Electro-optic modulator LiNbO3 MIOC Series Y-Waveguide Modulator
The R-MIOC Series Y-Waveguide Modulator is a LiNbO3 multifunctional integrated optical circuit (LiNbO3 MIOC) based on microelectronic technology, which can achieve polarizer and analyzer, beam splitting and combining, phase modulation and other function. The waveguides and electrodes are fabricated on LiNbO3 chip, the output and input fibers are precisely coupled with the waveguides, then the whole chip is encapsulated in a gold-plated Kovar housing to obtain well performance and high reliability.
-
ROF High Sensitivity APD Photodetector Light Detection Module avalanche photodetector
The high sensitivity avalanche photodetector is mainly composed of ROF-APR series APD Photodetector (APD photoelectric detection module) and HSP low speed high sensitivity module, which has high sensitivity and wide spectral response range and can provide different sizes of packages according to customer requirements.
-
Rof 3GHz/6GHz Microwave Optical Transceiver Module RF over fiber link Analog photoelectric receiver
ROF-PR-3G/6G series The analog photoelectric receiver has a wide band and flat photoelectric response characteristics from 300Hz to 3GH or 10K to 6GHz, and a high photoelectric conversion gain, which is a very cost-effective photoelectric receiver. It is very suitable for application in optical pulse signal detection, ultra-wideband analog optical signal receiving and other system fields.
-
Rof EOM modulator 1310nm electro optic Phase Modulator 10G
The LiNbO3 phase modulator is widely used in high-speed optical communication system, laser sensing and ROF systems because of well electro-optic effect. The R-PM series based on Ti-diffused and APE technology, has stable physical and chemical characteristics, which can meet requirement of the most applications in laboratory experiments and industrial systems.
-
Rof optical modulator 780nm electro optic Phase Modulator 10G EO modulator
ROF-PM series 780nm lithium niobate electro-optic phase modulator adopts advanced proton exchange technology, with low insertion loss, high modulation bandwidth, low half-wave voltage other characteristics, mainly used in space optical communication system, cesium atomic time reference, spectrum broadening, interferometry, and other fields.
-
ROF -BPR Series 200M Balanced Photodetector Light Detection Module Optical Detector
ROF -BPR series of balanced light detection module （balanced photodetector）integrates two matching photodiode and an ultra-low noise transimpedance amplifier, effectively reducing the laser noise and common mode noise, improving the system’s noise ratio, having a variety of spectral response optional , Low noise, high gain, easy to use and so on, Mainly being used for spectroscopy, heterodyne detection, optical delay measurement, optical coherence tomography and other fields.
BPR series 200M and 350M high-gain balanced detection modules, with high gain and low noise characteristics, through two PIN tube response optimization to achieve high common-mode rejection ratio and high output voltage amplitude (~3.5V), this detection module can provide different gain and coupling output modes according to customer requirements. It is very suitable for coherent detection systems such as coherent Doppler wind radar.
-
Rof Optical Modulator 1064nm Low Vpi phase modulator Electro optic Modulator
Rof-PM-UV series Low-Vpi phase modulator has low half-wave voltage（2V）, low insertion loss, high bandwidth, high damage characteristics of optical power, chirp in high-speed optical communication system is mainly used for light control, phase shift of coherent communication system, sideband ROF system and reduce the simulation of optical fiber communication system in Brisbane deep stimulated scattering (SBS), etc.
